ITP T9 wheels (set of 4) and Blaster bottom end (blown)

[phive70]

T9's = $130+shipping

bottom end = $40+shipping

top end = free+shipping

can be picked up. Located in Pa, north of Harrisburg, south of Wilkes Barre. Exit 124 off I-81. Zip 17970

------------
I have 4 ITP T-9 wheels for sale.

The fronts are T154152 and the rears are TT894115

The bolt pattern will fit a Banshee, Raptor, YFZ 450, and Blaster (have to swap rear hubs).

The front wheels are in better condition than the rear. Both front and rear can use a polishing, but the rears have oxidization. Front wheels do not have any bends only a minor rub on the lip. The one rear wheel has a slight bend in the lip (its very slight and I doesn't look like it effects the bead). Both rear wheels have slight lip rash. Lug holes are still round and not oval.

lug nuts not included.

Valve stems should be replaced.

Fronts:
bolt pattern 4x156
offset: 3+2
size: 10x5

Rears:
bolt pattern: 4x115
offset: 3+5.5
size: 8x8.5

---------------------------------------------------------

blaster bottom end. blown, will need crank at the least.

no clutch, no side covers, no top end.

good candidate for 4mm stroker.

hi res pics at the below links:
http://imageshack.us/a/img860/7572/20120311155429.jpg

http://imageshack.us/a/img96/631/20120311155420.jpg

http://imageshack.us/a/img833/7291/20120311155313.jpg

http://imageshack.us/a/img198/5140/20120311155350.jpg

http://imageshack.us/a/img190/4461/20120311155401.jpg

 

[phive70]

Blaster cylinder. rust inside cylinder. the bore is under 67mm. no head

I got this off quadboy22p when I purchased his blaster.

you just pay shipping. or it can be picked up (see first post).

Will only ship to the lower 48!!

Missing head stud and exhaust stud

not ported

 

[Surfrjag]

ill take the cylinder!

 

[Awk08]

ill take the cylinder!

that was a no-brainer ha ? I:I

 

[wwholden]

I'll take the bottom end if shipping is reasonable. Looks like most of the clutch assembly is still there just not the plates right? Shoot me a pm with a price shipped to Ohio 45385.

 

[phive70]

the first person who contacted me wanted both the bottom end and cylinder. I'm getting getting them a quote on shipping and picking up boxes from USPS monday morning.

if that deal falls thru, the next person in line will be contacted.

the bottom end and cylinder are tentatively sold.

 

[wwholden]

Ok let me know. Thanks