It fires up but doesn't idle!

[turbowrenchhead]

It fired up on the third kick. It sounds nice. However the idle is too low. I tried maxing out the idle screw, no luck. Tried maxing out the cable, same results.
How does one adjust the small screw by the air filter.
I have misplaced the extra jets I bought with the carb. Too much sh*t in the garage, needs some cleaning.

 

[jlsparky7]

 

[Blaaster]

Great Sparky, saves so much typing.

 

[turbowrenchhead]

No need to watch those vids. There is no tors on my new 35mm a/s

 

[Blaner]

It fired up on the third kick. It sounds nice. However the idle is too low. I tried maxing out the idle screw, no luck. Tried maxing out the cable, same results.
How does one adjust the small screw by the air filter.
I have misplaced the extra jets I bought with the carb. Too much sh*t in the garage, needs some cleaning.

you adjust the air screw by turning it in to richen up on idle, turning it out leans it, you need to be within 1 1/2 turns out range. if not change pilots, but if you not having results, chances are something is blocked, take carb off and blast it with air properly!