i think its time for a new clutch

[mud runner]

ok i was rideing today and i went to pull out on the road and heard somthing grinding so my first thought was o sh*t i hung a ring or somthing so i turned it off and kicked it again and heard somthing and it started so synce i heard somthing i turned it off and my buddie pulled me the rest of the way home and i took the side cover off and chunks of alluminum and clutch plates fell out and the clutch basket is f ed up and im missing 1 clutch and one of my preesre plates looks like it got really hot ill have pics up in a min

 

[mud runner]

any ideas on witch clutch i should get

 

[Awk08]

i run this clutch.........
Yamaha Blaster 240 Heavy Duty Clutch Kit | eBay
(read down the ebay ad at the testing they've done)
comes with an extra fiber disc to replace the smaller one and wave washer, and new heavy duty springs

and this basket........
PE Billet Clutch Basket Blaster | eBay

with a new inner hub.......
New Yamaha 96 00 YFS200 Blaster Inner Clutch Basket Boss 97 98 99 YSF 200 Hub | eBay

 

[mud runner]

i run this clutch.........
Yamaha Blaster 240 Heavy Duty Clutch Kit | eBay
(read down the ebay ad at the testing they've done)
comes with an extra fiber disc to replace the smaller one and wave washer, and new heavy duty springs

and this basket........
PE Billet Clutch Basket Blaster | eBay

with a new inner hub.......
New Yamaha 96 00 YFS200 Blaster Inner Clutch Basket Boss 97 98 99 YSF 200 Hub | eBay

i think im gonna get the 240 clutch but i want the pe basket but i dont have alot of money to spend on it

 

[Awk08]

i'd spend the $ on the basket first and maybe run the less expensive tusk clutch < does just fine on my black bike

 

[mud runner]

heres the basket

this is what was fell out of the motor then i took the cover off

 

[Wifesblaster]

I'd say it's time for a new one. Ken used a pe on mine. I like it.

 

[mud runner]

what do yall think happend me and my friend couldent figure it out (by the way he dident think a blaster could go as fast as mine did i guess my port job works pretty good)

 

[mud runner]

ok just for s==== and giggles what is the diffrence in the stock basket and aftermarket basket

 

[Awk08]

ok just for sh*ts and giggles what is the diffrence in the stock basket and aftermarket basket

stock baskets are cast and can do what you experienced.
A/M baskets are machined billet aluminum and are much stronger

 

[mud runner]

stock baskets are cast and can do what you experienced.
A/M baskets are machined billet aluminum and are much stronger

thanks i think ill go with a pe so this doesent happen again