ok, i bought a 2002 blaster 4 days ago for 100 with a siezed motor from sitting. that night i put mystery oil in the spark plug hole, put the spark plug back in and let it sit overnight, the next day i removed the sparkplug, put it in gear and rocked it back and forth. and it broke free! i spent a day cleaning/ rebuilding the carb because it had a clogged needle valve. i blocked off the oil injector and "eye balled" the mix and it fired up! but smoked like crazy so i thought i put too much oil in the mixture. i rode it and stopped and let it idle for about a minute and it pissed out oil all over the ground but the engine was dry so i drained out the gas and mixed it 32:1 and changed the gear oil but sometimes it doesnt want to run and when it does it smokes like crazy. also it constantly spits out fuel from the overflow. PLEASE HELP ME I JUST WANT TO RIDE MY QUADDDDD!!!!!!
i need help with my new blaster . . please help
- Thread starter falandys1002
- Start date
well the biggest problem is that it doesnt always wanna start i think if i run it it will stop smoking also how many turns out should the air/fuel mixture screw be out
Last edited:
white smoke is tranny oil burning, which could mean a bad crank seal also is it still pouring out gas out of the overflow
i noticed u said u pulled u bike behind a truck and it started and ran............well thats a tell tale sign of needing a top end rebuild due to no compression left..........thats why u cant kick start it
Mine did that same thing and I cleaned the carb really good and changed to good oil and 93 oct. It cleaned right up or your crankseal could be bad
