I have gone to team red. :O

[Markblaster20]

Picked up a 1997 Honda TRX300EX today.

 

[Larry's Shee]

 

[Larry's Shee]

JK They’re good machines
Considering I’ve got a 450 Foreman in the stable…….
This just for trails?

 

[Markblaster20]

JK They’re good machines
Considering I’ve got a 450 Foreman in the stable…….
This just for trails?

oh nice. Yeah got for trails and dry river beds around my area. closest one is about 5min drive away and rest under 30mins drive away. Will recover the seat black. that blue has to go.

 

[Larry's Shee]

If you don’t have a real good stapler may I suggest this
https://www.amazon.com/dp/B000EOJPC6/?tag=jyj356j5-20

Uses standard staples. I got one to do the Foreman seat. Drove them into the plastic seat pan just fine !

 

[79 bronco]

Well when your finished with the 300ex it will be the best one around!

 

[Markblaster20]

Well when your finished with the 300ex it will be the best one around!

Hahaha. shhhhh.

 

[Markblaster20]

If you don’t have a real good stapler may I suggest this
https://www.amazon.com/dp/B000EOJPC6/?tag=jyj356j5-20

Uses standard staples. I got one to do the Foreman seat. Drove them into the plastic seat pan just fine !

Thanks. Thanks one air tool i don't have. Will have to look into getting one over the Christmas sales.

 

[Markblaster20]

79 Bronco. I may have started. bahahaha. Still need a couple bolts for the frame skid plate. Also will have new led headlight early this week. Just been looking at other parts for it. shhhhhh. List for next year hahaha.

New grips, Yamaha OEM ones lol.

 

[Markblaster20]

Lower steering bearing and seals removed and what a job it was.

Tie rod ends replaced as they had a lot of movement in them.

Chain roller upgrade today.

Also got a new LED headlight, Has high and low beam. Just need to make bracket to hold it. Designing up a plate to hold the neutral light, reverse light and key switch that I will cnc.

 

[Markblaster20]

CNC time.

Test dash.

Start of the headlight mount.

Skid plate mounts.

Just working on the file for the headlight mount at moment and plan to get cut today and installed.

 

[Markblaster20]

Headlight bracket.

 

[Markblaster20]

Spacers for the headlight.

Just need to get a couple washers and shorten the bolts a bit.

 

[Markblaster20]

Skid plate finished.

Air filter as I got it. Even has a left stuck on it lol.

After cleaning.

 

[Markblaster20]

Went out for 1st ride and went mint.

Yip they are stuck hehe.