i was thinking of putting a hydraulic clutch on my blaster i find it hard to pump after a while of none stop riding but are why any good
THANKS
THANKS
hydraulic clutch
- Thread starter blasterkiidirl
- Start date
Magura is the only manufacturer I know of. About $199 on ebay or projectblaster.com
Should work smoother with less lever effort, especially useful if you have HP clutch springs.
Should work smoother with less lever effort, especially useful if you have HP clutch springs.
they are kinda expencive. i had issues with mine and replaced it with Yamaha Blaster 200 EZ Pull clutch lever Black Gripper - eBay (item 250724112408 end time Jan-07-11 18:49:28 PST) and its a ton better and cheaper. it has 3 settings.
Last edited by a moderator:
i too considered going hydro, i dont know why stock never bothered me, even though i run all 5 heavy duty springs, might be my popeye forearms from eatin my spinach ?????
but grabbed a used cr style e-z pull for like $20, and it made a ton of difference, i can hardly feel the clutch anymore, and can pull it with one finger,
and the one listed above would work great also,
i'd save the cheddar and go this route, big difference !!!!!
but grabbed a used cr style e-z pull for like $20, and it made a ton of difference, i can hardly feel the clutch anymore, and can pull it with one finger,
and the one listed above would work great also,
i'd save the cheddar and go this route, big difference !!!!!
I rode a ktm once with a hydro clutch.... oh man the awesomeness. If you've got the money go for it!
hydro work good for heavier clutch springs but they also suppose to be self adjusting as the clutch heats up and cools off. I have one just did not install it yet and need a ASV black lever for it
Last edited:
yea i was suppose to get one for my shee but the guy ended up selling it locally before the ebay auction ended
