hey guys where do i put the resivour

[JaronMoor#7]

ok guys so i won an 1988 trx 250r rear shock well where would i put my resivour can any of you put pics of it and what should i use to put the resivour on like any clamps or what and will it pretty much bolt on

 

[BlueDragon1998]

Use a hose clamp and clamp it to any thing it will reach to ...if you look through some posts some pics can be found...

 

[JaronMoor#7]

ok thanks manI:I

 

[L.T.]

Just like blue said

 

[4cfed]

i tryed a cr125 shock on my blaster.. sat wayy to high.. BUT your in luck i do have a good picture of where my rezzie was mounted,... two hose clamps to the frame, under the plastics..

 

[JaronMoor#7]

k thanks manI:I

 

[BlueDragon1998]

i tryed a cr125 shock on my blaster.. sat wayy to high.. BUT your in luck i do have a good picture of where my rezzie was mounted,... two hose clamps to the frame, under the plastics..

Hey how much longer was that shock over a stock one , besides being to tall how did it feel?

 

[blasterman312]

 

[4cfed]

it rode like sh*t, when hittin the brakes, the quad wanted to noce over and endo, even adjusted it still didnt sit low enough to be comfortable....

 

[ron89]

i mounted mine on the left side right next to the airbox.

 

[245stroker]

If at all possible, try to keep the rezzy away from the exhaust. Mines not a 250r shock but it has a rezzy

 

[JaronMoor#7]

ok thanksI:I 15 letters is gay