Front Wheel Bearing Size?

[littlegreen250]

Hi,

The front wheel bearings in my blaster are pretty rusty and the outer ones are seized. I think the previous owner neglected my little princess
What are the sizes of the front wheel bearings? inner and outer?
Please in mm if possible?

tnx.
LG250

 

[Blaaster]

A way to find out what bearing you need is to remove them and look at the bearing number printed on them.

 

[littlegreen250]

OK I'll take off the spindles tomorrow,
another little question:
I can choose between regular bearings or Stainless steel ones
which should I pick? the Stainless steel are roughly 3x more expensive but I can afford them
any reasons not to go for stainless?

 

[Larry's Shee]

https://www.google.com/webhp?source...e=UTF-8#q=Yamaha+Blaster+front+wheel+bearings

No measuring/guessing, easy peasy

IMHO, stainless would be WAY overkill.

 

[littlegreen250]

I want the dimensions because i want to buy the bearings in a store that specializes in bearings (bearing kits are expensive here) I think I'll just take the bearings with me

 

[Blaaster]

I think I'll just take the bearings with me

Good move.

If you do lots of water, stainless bearings are a good investment.

 

[littlegreen250]

I rarely go through puddles but I ride a lot in wet grass ans muddy conditions...

 

[littlegreen250]

I ordered them online total cost: €5,50 for Left and right (instead of €35)
sizes are:
inner: inside:20mm outside:42mm thickness: 12mm
outer: inside: 15mm outside: 35mm thickness: 11mm

 

[deeeebeeeeee]

Good job bro thanks for posting the sizes, it's the difference between buying a 10mm x 25mm bolt, or a fender bolt for a bugatti, same part much different price.
I am always looking for a way to get the same or better parts for less money.
That and it always helps to have the sizes when doing conversions and such

 

[littlegreen250]

No problem man. they arrived today, they aren't the best bearings but 4 bearing for 5 bucks is dirt cheap. So I can't complain.

 

[Bluesman]

I hope you're going to replace the seals too.

 

[littlegreen250]

Yeah, I'm going to buy the seals too