front brake/ rear wheels, 2 questions

[deerchooper]

the front brakes suck, lol.

ive heard some yamies with front disk would fit on the blaster, like the banshee and so on. is this true and what kind would fit?


has anybody found a 110 rear wheel hub that fits on the blaster? i tried a timber wolf, which has the right 110 bolt pattern but the axle spline is to big. any help would be great. the reason for me switching to a 110 bolt pattern is i have alot of honda rear wheels and tires, so i would use them instead of buying a set for it.

 

[djack12]

there are lots of front hydro brakes. shee ones fit with mods, and you can get a set form blaster 2003-up. i would check ebay.

to get a 110 rear bolt pattern, i would just by banshee or warrior rear hubs. they are a direct fit, and they are the bolt pattern you are looking for.

 

[deerchooper]

banshee and warrior are 115, not 110

 

[timsyfz]

not much help, but here is a nice little chart giving you an idea what all is 4/110

ATV Tire and Wheel Size Application Chart

 

[deerchooper]

thanks for the chart tim. the big question is what will fit the axle.

 

[deerchooper]

brrrrrrrrrrrraaaaaaaaaaap

 

[Braapbraap95]

for brakes you can check blasterzone.com they have a few kits, not sure how they work but they have a few.

 

[deerchooper]

well got 2 things in action right now.

1st is the brakes, i got a buddy bring me a complete front end off of a warrior to see if the spindles will work. if they do im set. im picking these up this sunday at a race and will play with it next week to see where im at. might have to mod a couple things but its no biggie to me.

2nd is the rear hubs, i made up a drawning and im having a machine shop make me a set of adaptor plates that bolt to the stock hubs and will have holes for the honda pattern. i should have these next week to try out. going with 1/2" aluminum and the studs will be 32* off of the hub bolts for streinth.

 

[ron89]

the warrior front brake set up will bolt up, but the upper ball joint woll not be like the blasters you will need to make it work ..

ATV Riders Forum - How To: Convert Blaster Drums To Hydro Disks
kinda like they did but that was on banshee brakes ..

 

[deerchooper]

thanks ron, that was help full. i wonder why he didnt drill the hole farther in and just put a threw bolt like the stock one was? i think im getting the a arms as well i could see how much time it would be to swap the ball joints and reweld them in.

 

[Braapbraap95]

yeah, be careful, and im pretty sure banshee/warrior brakes are about the same cuz they have the same manual and sh*t.

 

[245stroker]

durablue makes huds that will have your correct splines and the honda bolt pattern.

 

[ron89]

thanks ron, that was help full. i wonder why he didnt drill the hole farther in and just put a threw bolt like the stock one was? i think im getting the a arms as well i could see how much time it would be to swap the ball joints and reweld them in.

ahh no prob ... yeaa idk .. there is acouple ways about getting them to work .. i got a set of banshee front brakes every thing i needed for 20+ship off ebay, its the j-arm style but i got them to work .. i just welded the spindle to the upper ball joint and it works great and havent had a prob with them yet ..

 

[deerchooper]

well heres my hub adaptors for the rear. it came out like planned and i need to get longer studs now but thats no biggie, there ordered.


also, i started to work on the front hydro's, still havent got it done yet but there coming along.

 

[ruthless_one3k]

That's pretty slick man, I like it.

 

[deerchooper]

thanks dude

 

[deerchooper]

heres a pic from the side. also got the front brakes on, lol.