Fitting a crankshaft

[ruairiyblaster]

Thinking of installing a vitos +3 Have watched ken oconnors video of the assembly and know about checking case clearance but do I really need to take All the parts out that he puts back in?

What specialist tools will I need ?
What other stuff will I need yamabond, and seal grease , brake cleaner anything else ?
Is there a full video of taking a blaster crank out anywhere?
What way do u use to get the crank out if it sticks in the case?

Help will be appreciated thanks

 

[Larry's Shee]

http://www.blasterforum.com/do-yourself-20/diy-crank-puller-43994/

 

[Larry's Shee]

Haven't watched the vid, but presume trans/balancer shaft? You can pull left case from crank and leave everything in right case. Would highly suggest if you don't have a Clymers manual at least look at or download the online manual. Be sure to use new seals. Wouldn't hurt to seal key and collar to crank on clutch side, they have been known to leak there.

 

[ruairiyblaster]

Will have all new seals and yes I've got a manual thanks for link !

 

[enalkarion]

That DIY crank puller works great. I've used it for pulling and re-install a crank, and it works well both ways. Finding metric all-star in the US is a pain, so I re-tapped for standard. A little sketchy but it worked.

 

[Blaner]

thanks larry I was thinking as I was reading "how am i going to find where I put that thread?" beat me to it