exhaust springs...

[sickOne]

i have a toomey b1 exhaust and lost my srings for it and im having a hard time finding them on any store, does anybody knows where i can get them? or know any other replacement that might work?

 

[yb200]

go to a hardware store they have all kinds of springs

 

[sickOne]

i did that and got confuse because i didnt know how strong of a spring to use...but if it doesnt matter i can do that

 

[1997blaster]

i did that and got confuse because i didnt know how strong of a spring to use...but if it doesnt matter i can do that

just make sure its pretty srong so the pipe dont fall of

 

[sickOne]

ill do that thanks....

 

[recruiter101st]

Anyone Know the exact length?

 

[cole454]

I got 3 3/4" from hook to hook on my toomey springs.

Link http://www.toomey.com/html/pipe_parts1.htm Look about halfway down page.

 

[Budget_Blaster]

I didnt get springs with the used sst setup so i pilfered around the garage and found a partial brake hardware kit for one of my mustangs and after a little modding its perfect very stiff and a pita to put on and take off due to what the springs were meant for.but it holds much tighter than the fmf springs.

 

[1995blaster]

sorry for the thread jack but i had to make a bracket since the origional bracket and my exhaust is solid wont move buy hand a spring wont do anything do u think i need one it doesnt leak right there

 

[mac2mac]

Products - ATV - FMF Racing

 

[Budget_Blaster]

sorry for the thread jack but i had to make a bracket since the origional bracket and my exhaust is solid wont move buy hand a spring wont do anything do u think i need one it doesnt leak right there

im confused is yours mounted solid as in its welded?I run the springs on mine even though its welded kind of a just in case the welds break.

 

[99LRDblaster]

sorry for the thread jack but i had to make a bracket since the origional bracket and my exhaust is solid wont move buy hand a spring wont do anything do u think i need one it doesnt leak right there

He has a Toomey not an LRD. And yes, the LRD uses a spring as well that does the job of holding the pipe into the flange.

 

[79 bronco]

What length do you need?? They have Moose Racing Exhaust Springs in the Dennis Kirk Catalog. They are listed by LENGTH with part #...