Do i have a true Blaster 240?

[murderedblaster]

Here are some pics of the motor and carb anything you guys can tell me about the pics would be helpful.....

http://www.facebook.com/photo.php?pid=817107&id=1503788585
just cut and paste the link

 

[lasxgames]

CT site BLASTER

 

[lasxgames]

I doubt that's CT head, but it might be ported and milled and looks like an after market 30mm carb have to measure though if so it may be a 200cc, most 240cc are setup at 34mm carb or higher, but that doesn't mean it isn't a 240 without measuring the bore size. it looks like you need a head gasket or recheck the head bolts

 

[blasterfreek30]

looks like its a stock cylinder to me bro

 

[murderedblaster]

carb is either 34 or 38 mm was just looking on the website. i don't think the stock head would really work with a big carb like that.
talked to ct racing and they said for the price i def got a true 240 kit not just a bore but what do i know this is my first quad.... all imput is helpful

 

[murderedblaster]

what makes you think i need a head gasket? real newbie question i know

 

[lasxgames]

common leak try tighten the head bolts

 

[lasxgames]

fyi manual
http://www.rydindirty.com/blastermanual.pdf
__________________
good links
http://www.blasterforum.com/off-topic-7/blaster-websites-13531/

 

[92blaster]

right side pipe who is it from?? if it is a sonic kit another thing is the reed cage there is 6 bolts i belive insted of the stock 4

 

[murderedblaster]

Kid looked at it the other day and said it was after market but there are no labels any where on it......

 

[murderedblaster]

going to try and tighten the bolts tommorow thanks again....