cylinder boring

[liljatownboy]

ok so was wondering if dealerships bor cylinders. my friend just picked up an 02 rm125 and it needs a bore the piston done have anynumbers on it so dont know how to measure it and what piston to buy? what ramge do bores run i seen online 35 per hole and 10 ship

 

[fioz600r]

If you have access to micrometer and either measure the piston or the cylinder.

You dont have any good machine shops around your area you could take it to. I think a stealership will rob you on the price.

 

[kylepotatoes]

I know my local dealership was going to send my cylinder away and charge $80 but I got Car Quest to do it for $35 and I got it back the next day

 

[MINIGfather]

I know my local dealership does everything. All your good dealerships will have a parts and service department. I went to a local dirtbike and atv repair shop. They did it all and had it done in 2 days. They were also cheaper by about $75 and were gonna take about a week. I always look at this way. I would rather support a local shop then a dealership. Im sure there has to be a machine shop in your area that does race motor work and can hook you up.

 

[lasxgames]

most dealerships send it to a machine shop, check around and cut out the middle man$$

 

[blaster99]

your gunna have to get it replated send it to powersealusa they do a nice job

 

[liljatownboy]

any machine shop can do cylinders?

 

[Foolio]

You will have to ask if they do the smaller atv cylinders. We have a Napa with a machine shop, but they can only bore auto engines. The dealership where I live charges $80 for a bore and needs the piston you plan on using to get the clearnance right. Good luck...

 

[blaster99]

any machine shop can do cylinders?

not any machine shop will renikasil it.plus i wouldnt trust just anyone