custom swingarm build

blaster003

Member
May 13, 2014
253
12
54
25
I plan on building a +2/2.5 swing arm. does anyone know where i can buy the dropouts that hold the rear carrier on at the end of the swingarm? i am wanting to buy them and weld them on to my swingarm that i plan on building
 
there is a specific place you can buy swing arm material pre made, ill try and find it for ya..
 
i want to build one made of 1 1/4 dom round tubing i checked the link and there wasnt anything for the blaster. i want to build one that i can bolt up the stock carrier i need the pivot tubs at the front of the swing arm and the plates that are welded to the swingarm at the end by the rotor and sprocket that holds the carrier on
 
if you're talking about the carrier ears (what i call them)
you'll need to carefully cut the existing ones out of your swingarm to re-use, or have them custom cut.
as far as i know, nobody has ever offered them for sale commercially
 
If you're going to go to all the work of building a swingarm, it's stupid to build a stock carrier type. The roundhouse carriers are 10,000,000% easier to do a chain adjust.