Crotch's Rebuild

[CrotchRocket]

Uploaded with ImageShack.us
I bought this for my sons bday coming up with hopes of just repair a few things and have a rider, got a good deal on the thing I guess but I notices while prepping the frame for paint the frame was bent so it has became a full frame switch which is fine because it will be much nicer than it would have been otherwise.
I bought it sight unseen with 2 additional frames, 2 additional rear tires on rims, 1 additional cylinder, a box of what I assumed were ALL the parts. (Not even close) It had 1 intact motor loosely mounted to the red frame. It was missing the entire rear brake system all I have is the lever.
Before I forget I have a spare cylinder I can part with I measured with my caliper and its 2 21/32- 67.4688 with some fair scratches. Give me a shout if anyone needs it, I will price it below Ebay pricing. Or possible trade...anyway I will be adding more pics later.

LaterB)



Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


More pics to be added later, ideas welcomed.

 

[Blaner]

good looking project you got there!

 

[DirtBlaster03]

Good haul! Make sure to keep us updated with pics as you progress.

 

[yamaha28]

Looking sweet! How is the condition of the motor? do you have one fully together?

 

[blasterdemon7]

Nice project. .

 

[Awk08]

i use this thread for both reasons.....welcome to BF

and lookin good on the build so far, glad ya found the bent frame before ya got too far, although i spotted it right away..... right behind the bottom right side a-arm bracket, after i've bent a few there myself, ya learn to look for them !!!!
keep them pics coming as it progresses, we're definately pic whores here, LOL

 

[blasty 95]

Welcome, nice project you got there.

 

[CrotchRocket]

Uploaded with ImageShack.us
Check out these Ive Cream bucket brand TM. Reeds! Adds 5 horsies guaranteed! I am never surprised when I rip into a motor now days..removed alot of cast piston from the crankcase plus some aluminum was mashed into the connecting rods oil channel.



Uploaded with ImageShack.us

The motor had a cracked crankcase cover oil side luckily I had a good spare, Its apart getting new crank seals..the top end and paint. Had my GF helpin she's not afraid to get her hands dirty! I:I


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us
05 Zuma "Sleeper"
Malossi 72cc polished and ported
Malossi Delta clutch
Athena Variator and ramp
5g Rollers
84 main jet
46 Pilot
60 mph

Stock air box and pipe

 

[CrotchRocket]

Uploaded with ImageShack.us

 

[Awk08]

hey, at least you can run a bar scanner over them reeds to figure out what make they are !!! LOL

progress looks great !

 

[yamaha28]

Your front shocks are upside down! haha I did the same thing once. Looking great though!

 

[MountainMike]

Uploaded with ImageShack.us

This thing is looking awesome!

Something about this picture makes the machine look very... badassB)

 

[CrotchRocket]

LMAO they are upside down..thanks for the headz up.
@awk bar code scanner thats some funny s&*%!

 

[Doubleh74]

good luck with that project. hope it looks good

 

[CrotchRocket]

Well Gent's made a lot of progress since the last post, new pics coming tomorrow. Hopefully nothings on upside down lolI:I

 

[CrotchRocket]

Its been awhile since my last post I thought I'd update..on 5-9 on the way home from work riding my 05 zuma I got hit head on by an 80 yr old half blind lady in a 2012 Buick, broke my leg in 3 places.
This was a very important project to me as it was my sons 12th birthday present, id like to personally thank AWK as he knew how important this was to me because I explained it all to him when I ordered his full gsxr brake system for the bike, he got a rush on the parts, fabbed it out and got it shipped with plenty of time to get it put on so THANKS BRO!
I worked on the bike after the ER visit the day of the accident till dark, and as more parts arrived that I had previously ordered I managed the strenth to work on it every day up to my surgery date of 5-15. They used 4 screws in 2 bones in my ankle and added a pin and plate plus 2 small screws to my fractured fibula...after surgery till today (Sun) 5-20 I worked on her with the help of my girlfriend jody and my 75 yr old mom broke out her sewing machine to help out on the build. My son couldnt be happier and he now has a nice bike with safer "Awk" brakes to help him stop the beast..thanks again bro anytime I can do ya a favor just ask.

Pics of my wiped out leg on my imageshack acct...browse at your own risk.

 

[mjgnslngr]

whoa! glad to hear youre ok! wish you a speedy recoup man! good news about the birthday blasty! its amazing what us parents will do. nice job!!!!!!!!!!!!!!

 

[Awk08]

the blaster came out awesome bro, very nice work,
bet the boy is really happy !
glad i could help, and likewise to you...anytime for anything, just holler
get well soon, although it doesn't seem to be holding you back much !!!