CRankCase

[EXtremeRider]

i have a few questions
1.) When removing the oil injection the plastic gear is located inthe
crankcase?
2.) Wats the best way to plug the lines comin out from the oil pump
3.) Is 10 w 40 the oil used in the crankcase

 

[yb200]

i have a few questions
1.) When removing the oil injection the plastic gear is located inthe
crankcase? it under the clutch cover
2.) Wats the best way to plug the lines comin out from the oil pump..all you need to plug is the hole on the carb
3.) Is 10 w 40 the oil used in the crankcase...10-30 is what yamaha recommends in the tranny....but there are better oils like belray gearsaver