first off acid when i searched "clutch" about 20 pages came up because it gave me every thread with the word clutch in it...so yeah! and i tryed a pair of vise grips and it wouldn't work because of the angle. I am ordering the allenhead set tomorrow if they have one. if not I will go to a hardware store and find one. The outer covers are already converted, only ones left are the center case half screws.
thanks for the heads up on the breakdown link on the site scot. the clutch was good but i figured i had it apart so i'd check it...how thick are the disks supposed to be? I was using a #3 screwdriver but it was he-man tight so it stripped, i just need to get a new one and all is well. As for the ball i never saw one.
thanks for the heads up on the breakdown link on the site scot. the clutch was good but i figured i had it apart so i'd check it...how thick are the disks supposed to be? I was using a #3 screwdriver but it was he-man tight so it stripped, i just need to get a new one and all is well. As for the ball i never saw one.
