Cr250 motor swap to Blaster
- Thread starter yamaha28
- Start date
My camera is refusing to turn on so I used my mothers camera. She is a professional photographer so her equipment is pretty high end, needless to say she was squeamish about it venturing into the depths of the dirty garage. I think the pics came out nice so let me know if you want all the pics with this quality!
The frame as it sits:
The frame from another angle:
Messed up a arm:
Another thread disaster on my other a arm:
Tie rod that I beat the crap out of:
I didn't know I had ice tires?:
Do you like the paint job? Be honest!:
The frame as it sits:
The frame from another angle:
Messed up a arm:
Another thread disaster on my other a arm:
Tie rod that I beat the crap out of:
I didn't know I had ice tires?:
Do you like the paint job? Be honest!:
Your scootin right along. Also the paint looks like from the pics there is either dust on it when you painted or settled on while or after painting. Assuming maybe you had them out while they were wet and you were grinder or sanding the frame?
I like the color scheme....but what the hell do you have going on with that peg and pedal? The brake pedal is on the wrong peg 
I like the color scheme....but what the hell do you have going on with that peg and pedal? The brake pedal is on the wrong peg
it's not that it's on the wrong peg, but if you look closely, it's on the right peg it's just put on backwards like it is aiming towards the axle instead of the a-arms.
sandancer: thanks! you should do it!
Prime: your messing me up! I stared at the picture trying to figure what I did wrong. then casey set us straight lol.
Here are some more pics just for fun!
my nice rear caliper
Just another couple pics of the color scheme:
Prime: your messing me up! I stared at the picture trying to figure what I did wrong. then casey set us straight lol.
Here are some more pics just for fun!
my nice rear caliper
Just another couple pics of the color scheme:
Looks good i like the paint. Btw i went through lots of differant brands and colors I figured out that engine enamel works the best. I figured that out after im almost done haha and all paint has been painted
Also I just messed with my cable brakes. It was really easy looked about the same i just took it apart and oiled everything put it back together and adjusted they skid now.
Also I just messed with my cable brakes. It was really easy looked about the same i just took it apart and oiled everything put it back together and adjusted they skid now.
Last edited:
lol no problem guys i'd hate to see you riding with a backwards brake pedal!!! 
haha keep up the good work bro
haha keep up the good work bro
Lookin' good! If you need a new set of tie rods, I have two good ones with ends and castle nuts! $ 15.00 shipped to your door...
might just have to take you up on that!
So I was painting in my booth today and got impatient for stuff to dry. I primed my front bumper with white primer. Now I have speckled white foot pegs and brake pedal. X( Might just leave it that way, its not to noticeable.
Dupli-Color :: Metalcast
Replicates anodized coatings such as the ASV levers. One tip for large parts use some type of adhesion promoter. Almost a perfect match to my ASV levers on my old YZ two fiddy
Got mine at O'reilys auto parts. I'm sure napa, advance, vatozone, and the others sell it.
(begin rant) BTW for my fellow Kawasaki owners, I wish people would ask ASV to begin selling levers in green. (end rant)
Replicates anodized coatings such as the ASV levers. One tip for large parts use some type of adhesion promoter. Almost a perfect match to my ASV levers on my old YZ two fiddy
Got mine at O'reilys auto parts. I'm sure napa, advance, vatozone, and the others sell it.
(begin rant) BTW for my fellow Kawasaki owners, I wish people would ask ASV to begin selling levers in green. (end rant)
Dupli-Color :: Metalcast
Replicates anodized coatings such as the ASV levers. One tip for large parts use some type of adhesion promoter. Almost a perfect match to my ASV levers on my old YZ two fiddy
Got mine at O'reilys auto parts. I'm sure napa, advance, vatozone, and the others sell it.
(begin rant) BTW for my fellow Kawasaki owners, I wish people would ask ASV to begin selling levers in green. (end rant)
good stuff! I will check it out when I can get to an auto place. I already have some parts painted red.
hmmmmm would two tone red with black plastics look gay, or somewhat cool? I am not sure :-/ might just have to give it a try, any input from the brethren?
Similar threads
