clutch help

[cheddar89]

Do u resoak the clutches each time u put them in or is it just the first time u install them should I resoak the old ones in atf if I put them back in

 

[Racer51]

yep line the dot on the basket with the dot on the pressure plate and tork them springs down correctly and flush the sys once if your paranoid. I use 10w-40 amsoil motorcycle oil.

 

[cheddar89]

Aight ill make sure u get them lined up I was just paranoid cause it would just stay in the powerband in 5&6. Just seemed like it was a polaris how they rev out if that makes since to anybody lol didnt know if that was normal behavior or not on these things

 

[Larry's Shee]

Also depends on gearing/tire size. If geared low with small tires it won't be pulling hard. Does it go thru the gears quickly?

 

[cheddar89]

Well I got clocked at 61 so I imagine im running factory gears its got bigger tires on it too im not sure how to explain it exactly but if I got it in 5th and half throttle I can put it in 6 and full throttle id be on the top of the powerband

 

[cheddar89]

Ok so I started to look at my clutch basket today ant theres a bolt broke off theres only four bolts that hold on the clutch plates

 

[Larry's Shee]

Probably slipping because of the missing bolt/spring, that's 20% of your "holding" power right there, not to mention that it's also uneven pressure.

 

[cheddar89]

Yea I put it back together and squeezed the clutch and it pulls out on one side I ordered one off ebay just time to play the waiting game