Cheap mods?

lokisbuddy

New Member
Feb 8, 2008
253
1
18
Oscoda Michigan
Based on the very few mods listed in my signature, what would be the best thing for me to spend 150.00 on? i was thinking pipe and silencer if i can find one
and maybe some jets what other options do i have for low to mid range power?
 
used pipe would be a good idea. Reeds would be something to do to. Or save up a little more and have a port job done by flotek.
 
My buddy does all my port work thats on the way but i was looking more for help between a 3mm vitos stroker crank or a pipe and silencer. which would be better? the reeds are carbon fiber but im not sure of the brand
 
If you can put the stroker in yourself its def worth it. But its gonna cost a hell of a lot more than 150 if a shop does it.
 
It said there is minimal machining nec. for the 3mm stroker kit....what would show the most gains on mid to low end? pipe and silencer or stroker?
 
well from what i've learned you would need a higher flowing exhaust with the stroker. and i dont think you would see a really good gain with just the stroker without a pipe, port work to match the extra stroke and head work. but thats just me im still learning here to
 
I vote for get a pipe.You can get a good used pipe off e-bay.Bolt it on in about 30 to 45 min. and enjoy the new power. also you'll need to rejet.Then when it's time to rebuild port it shave the head and add that stroker crank.
Then it will scream!
 
Ok im going for the pipe...mainly because the bike has a brand new weisco piston and i cant see tearing it out right now. so what size jet should I throw in? and where can i get a used pipe and silencer? I dont have an ebay account because i got screwed over and cancled it I only have around 150 to spend.
 
i would deffinitly get a pipe first, even if you dont rejet it you still get a lot more power, besides a jet is only a few bucks to get