Carb Question.

[Prime]

You might have to shave one down...that's what I did. Anyways if you really can't get to it...hold it up to the light and look through the top of the carb where the needle goes in..there is a small hole you should be able to see through, if it is dim or you can't see through it at all, you have to take it out and clean it.

 

[Pwncody]

I can see all the way through. But I dont see any screw.

 

[Prime]

It is very small. I will take a picture of one in my hand to show you...be right back lol.

 

[Prime]

Here is the pilot jet.

 

[Pwncody]

Here's what I got.

-What If I have no carb cleaner? I dont have a screwdriver that will fit down there, Ill drive out tammarow and get one and some cleaner and we will see If that works.

 

[Prime]

Nope. It's the little hole to the left in the bottom picture. It's not really a screw...the jet has threads on it. You should have a 32.5 in there, but I'd check to be safe. Also, that is the jet that you HAVE to clean. I don't think there is any other carb part to be stressed to clean more.

 

[Pwncody]

Okay, Ill go out tommarow and get a screwdriver that will fit and some cleaner.

 

[Prime]

Sounds good. I will post pics of where exactly I am talking about first thing in the morning.

 

[Pwncody]

I think I know what your talking about Im just not sure. Thank's bro.

 

[Larry's Shee]

Be sure to plug or cap the nipple on the right side of carb nearest the air cleaner.