is there some sort of trick to bleeding brakes? bc they have become a nightmare. btw apparently bleeding brakes like you would a car doesnt work:/
brakes....
- Thread starter lowkhalbalr
- Start date
when you do it try lifting the cylinder higher than the caliper. in other words gravity bleed em. i had to do that to mine to get em to work before.
get the caliper higher than the master, so any air trapped in there flows up and out the bleeders, and flip or turn the caliper so the bleeder is facing upwards also, and if doing a dual piston like the gsxr ones i do, bleed the one furthest from the line first, then the closer one
and then yes, bleed them just like a car, pump a few times, hold pedal down, crack the bleeder, while still holding the pedal down tighten the bleeder
i have never had any luck with gravity bleeding, not even once
and then yes, bleed them just like a car, pump a few times, hold pedal down, crack the bleeder, while still holding the pedal down tighten the bleeder
i have never had any luck with gravity bleeding, not even once
