Ok guys, as most of you know by now, after ive started all these threads, ive been rebuilding my blaster. i have a friend who hads a friend who runs a small engine shop/and does four wheelers. so we took my motor over, tore it down, replaced the crank bearings, all oil seals, then rebuilt the top end.
i put it back in the bike, and today i finally hooked everything up (carb, gas, spark plug, key turned, and switch on) and tried to start it....no go, after about 10-15 kicks.
any idea whats wrong? i accidenatly left the choke pulled all the way out while i ran inside to get something, could it have been flooded?
help please?!
i put it back in the bike, and today i finally hooked everything up (carb, gas, spark plug, key turned, and switch on) and tried to start it....no go, after about 10-15 kicks.
any idea whats wrong? i accidenatly left the choke pulled all the way out while i ran inside to get something, could it have been flooded?
help please?!