BLASTER PEG WIDING KIT DIYS

[blaster551]

just follow these simple steps to have double the foot peg size
1.cut right at where the peg bolts up to the frame keep it as long as you can
2.use a saw or sawasall with the peg in a vice to keep it from falling
3.use the stock bolts given you you and bolt it up tight or ir you dont have them use any bolt that fits

 

[randelator]

great post keep up the good work!!!!!

 

[ClimbAnyHill]

Looks good! Might want to cut yourself some material & weld some kickups on those ends!

 

[blaster551]

oooo and add them to the rear of the peg it is very important

 

[crusty4365]

i dont understand

 

[Stryder917]

i dont understand

a piece for the back of your peg so you don't get ur foot ripped off on your tire lol

 

[blaster551]

well take another pair of stock pegs cut the ends off them so its just a long peg keep them as long as possible then bolt them up to the holes and sience they are the same peg the holes are the same so bolt them up and wala!!!! you have bigger pegs

 

[2stroke4life]

this is stupid, i should make a diy on how to widen handelbars, weld tubing to the end of them=))

 

[crusty4365]

this is stupid, i should make a diy on how to widen handelbars, weld tubing to the end of them=))

when ur foot eventualy slips off and you end up running over ur own leg, then wel see whos stupid.

 

[fmxr47]

2stroke4life's panties are just all in a bunch, he's aparently feeling a little cocky

 

[Paulie B]

Here's a set I made up.

 

[Paulie B]

Sorry their so big!

 

[blasterfreek30]

paulie thats nice work you have there, looks profesional!

 

[blasterfreek30]

wanna sell them lol!

 

[Paulie B]

lol thanks alot. In hind sight I should have sanded off the threads on the bolts inside but I'm just knit picking myself.
They will go with the quad if I ever sell it :-D