ok so i will start i have a 200 blaster i just did a top end rebuild. it has new piston, rings, gaskets, brand new cylinder stock bore, and everything. first after rebuild i got it running and after some work and adjusting i got it starting good and idling.
but the problem is once it is running it cuts out dies as soon as i give it gas. it idles fine but dies when i give it any gas. sometimes it will run at full throttle but anything less it bogs and dies. also it runs really hot and sometimes doesnt want to run once its hot.
i can sometimes get riding it at full throttle but once i dont have it at full throttle or have the clutch in it dies??????? so it is impossible to actually ride
I have no idea what the problem is... im stumped this time.
The quad has a full fmf gold series exhaust. also when i did the top end i found out i have vforce 2 reeds. (they are starting to fray at the ends a little but nothing bad.
it idles perfectly fine but at idle sometimes it will pop and then backfire sometimes dying sometimes it will stay running fine. it gives off a little white smoke but not alot and i think that is from me acidently getting a little gear oil in the crank case.
i tried spraying some carb cleaner into the cab but it dies and then just runs the same once i restart it.
sorry for the long question just trying to give all the info i have at the moment.
any input or knowledge would be awsome i was thinking of getting new reeds and doing a carb rebuild but i have no idea if this will even fix anything before i start dumping any more money into it. im clueless on why it wont run.
but the problem is once it is running it cuts out dies as soon as i give it gas. it idles fine but dies when i give it any gas. sometimes it will run at full throttle but anything less it bogs and dies. also it runs really hot and sometimes doesnt want to run once its hot.
i can sometimes get riding it at full throttle but once i dont have it at full throttle or have the clutch in it dies??????? so it is impossible to actually ride
I have no idea what the problem is... im stumped this time.
The quad has a full fmf gold series exhaust. also when i did the top end i found out i have vforce 2 reeds. (they are starting to fray at the ends a little but nothing bad.
it idles perfectly fine but at idle sometimes it will pop and then backfire sometimes dying sometimes it will stay running fine. it gives off a little white smoke but not alot and i think that is from me acidently getting a little gear oil in the crank case.
i tried spraying some carb cleaner into the cab but it dies and then just runs the same once i restart it.
sorry for the long question just trying to give all the info i have at the moment.
any input or knowledge would be awsome i was thinking of getting new reeds and doing a carb rebuild but i have no idea if this will even fix anything before i start dumping any more money into it. im clueless on why it wont run.