Hey everyone, I'm new to the blasters. I have a 2001, stock as far as I can tell. The problem I'm having is it isn't starting properly. It's getting fire to the plug and gas is on. I did turn the valve to drain the carb and a lot of fuel came out. Not sure if the float is sticking or what. Any help would be great. Oh and it's been running and starting fine up until a few days ago.
Blaster isn't starting
- Thread starter Preston Blakely
- Start date
check compression, needs to be at least over 100psi, 110-130 preferably
check the reeds..... pull carb off boot and look in with a flashlight to see if all 4 reed petals are intact, not cracked, hanging open, badly chipped
check the reeds..... pull carb off boot and look in with a flashlight to see if all 4 reed petals are intact, not cracked, hanging open, badly chipped
