Blaster build about to start

[blasterboy32]

got my motor rebuilt and reassembled yesterday and today and in the quad. gonna re torque the base and head bolts tomorrow then start doing heat cycles. also put some of the plastic back on and the blue doesnt go at all so im probably gonna be painting them black in the near future. all i really have to put on now is the tank and rear plastics. i ran all the wiring. a big thanks to braaptor to helping me through stripping some of the un needed wires out of my harness. also adapted a skid plate from a warrior and made it fit my blaster. ill get pics up of that and the whole quad later tonight.

 

[Braaaptor]

got my motor rebuilt and reassembled yesterday and today and in the quad. gonna re torque the base and head bolts tomorrow then start doing heat cycles. also put some of the plastic back on and the blue doesnt go at all so im probably gonna be painting them black in the near future. all i really have to put on now is the tank and rear plastics. i ran all the wiring. a big thanks to braaptor to helping me through stripping some of the un needed wires out of my harness. also adapted a skid plate from a warrior and made it fit my blaster. ill get pics up of that and the whole quad later tonight.

Glad ya got it figured out! Can't wait to see the Blasty all up and running real soon.

 

[blasterboy32]

warrior skid plate

tucks into the front bumper perfectly

still waiting for my new carb cap to get rid of the tors unit

pretty much all thats left of the wiring besides the wires running to the stator and ignition coil

head studs that i still cant get out to put in my other cylinder

 

[sporty982000]

Looking very nice !

 

[blasterboy32]

Moose Carburetor Cap Kit | MotoSport

is this the cheapest tors delete kit there is?

 

[Braaaptor]

Moose Carburetor Cap Kit | MotoSport

is this the cheapest tors delete kit there is?

Blaster's looking good!

This is the cheapest kit out there, and it will work fine...

Motion Pro - TORS Eliminator Kit - 01-0874/01-0023/01-0013

But the Moose kit you've found is the best looking and highest quality. It comes with a nice braided stainless steel throttle cable, plus that sexy anodized aluminum carburetor cap.

Whichever kit you decide to buy, here's how to install it when it comes:

http://www.blasterforum.com/do-yourself-20/aftermarket-carburetor-cap-idle-screw-install-22174/

 

[blasterboy32]

OK thanks. I think I'm going to go with the motion pro kit since its a third of the price of the moose one. Does it come with a tap to bread the hole for the idle screw?

 

[Braaaptor]

Not sure on that one. Id call and ask. The one I bought a couple years ago was complete with tap, drill bit, and idle screw, but I dont see those parts listed in the pic now, so IDK.

 

[blasterboy32]

i have a tap and die kit so i dont really need those things and i have drill bits but i do need the idle screw and have to make sure i have the right size and thread tap

 

[Braaaptor]

I know Vito's sells just the idle screw kit if you need it.