Blaster bogging?

[josh519]

Just got a 2003 blaster, it bogs really bad when you give it throttle, idles fine, everything is stock please help!!!

 

[speedyslyder]

if that is it in profile pic
dont look to stock to me....appearance wise

it is either tors system
broken reed
fuel flow problem
low compression

 

[speedyslyder]

http://www.blasterforum.com/threads/03-06-tors-removal-diy.41973/

 

[josh519]

if that is it in profile pic
dont look to stock to me....appearance wise

it is either tors system
broken reed
fuel flow problem
low compression

No it's not the one in profile, I took the head off and noticed is ton wet with gas, so it ma be a bad reeds. I'm gonna order some tomorrow.

 

[Herpderplol]

You should look at the reeds first. You also need another head gasket because you took the head off.

 

[Blaaster]

It may just be a simple task of cleaning and adjusting the carb.

 

[josh519]

It may just be a simple task of cleaning and adjusting the carb.

Carb is super clean, tried adjusting and got nowhere, reeds looked ok, but piston was still getting soaked with gas and still just bogging, no power,

 

[jvb]

Isn't the fuel float misbehaving?
Maybe it floods the carb.

 

[Fast6hand]

Did you check the float for any holes? Can you shake the float and hear fuel in it?

 

[jvb]

And to be sure you could check the ignition system.

 

[josh519]

Fl

And to be sure you could check the ignition system.

float is good, checked degree key it's good,when I was pulling off magneto I noticed it spun very easily

 

[josh519]

Got it running, the previous owner it the wrong wires for tors elimination, fixed that, then found I didn't tighten the main jet, it rattled out,,, it's running great now. Time to get rid of all this stock stuff!! Thanks for all who replied!!!