baseline slide setting

[lowkhalbalr]

anyone know what a good baseline setting for the slide on a 35mm pj? thanx

 

[Awk08]

the slide ???? you mean the needle clip position ??? most peeps start at middle groove

 

[lowkhalbalr]

the slide ???? you mean the needle clip position most peeps start at middle groove

i mean for adjusting the linkage.. is there a good way to set it for a starting point?

 

[super noober]

i mean for adjusting the linkage.. is there a good way to set it for a starting point?

if you mean how much slack to have in the cable i like juuuust a tiny bit of slack so its not pulling on the slide opening it up at all but still right there when you punch it

 

[royalt67]

And the slide opening is adjusted by the idle speed screw on the side of the slide housing.

 

[lowkhalbalr]

sweet ill check it out. thanks again guys