April 2012 BOTM Entries

[cbaber]

Entries for Blaster Of The Month (April 2012) are now open!

Please make sure you have read the following thread before creating your entry.
"Blaster Of The Month Entry Details, Rules and Requirements..."


Have a great time and GOOD LUCK!​

 

[speedemon17]

Chassis | Suspension | Controls:
A Arms: stock diamondj widening kit Swingarm:
swingarmshop +6 cut out to be a +4
Steering Stem: stock
Axle:lonestar Locknut: durablue
Hubs F|R: hydro/stock
Bars:renthal Throttle/Clutch Lever: stock/sunline
Grips: progrip
Nerfs dg
Bumper: ac
Front Shocks: works dual rate with remote rezzies
Rear Shock: stock
Brake Lines:speedlines
Rotors F|R: hydro all around Rims
F|R: doughlas red label Tires
F|R:itp holeshot/maxxis razr

Body: maier race cut
Frame: 2001 red Plastic: white all around Graphics|Seat Cover: nstyle/stock Number Backgrounds:none
Bar Pad outlaw
Fuel Tank: stock

Engine|Drive System: Cylinder|Head:trenga 200 ported,stock Bore & Stroke:70 over/+3mm stroker Displacement: 215 or so????
Carburetor: trenga 30mm oko
Air Filter|Box: stock box uni/k&n filter
Pipe|Silencer: rare multi cone trinity pro circuit silencer
|Plates: Gearing F|R: 14/40
CDI|Killswitch: Cooling: air duh
Other: ct sonic 200 blaster pipe,double footpegs,yfz heelguards,trenga reed spacer trenga reeds,pro design manifold,ac fskid plate,ac swinger skid plate,outlaw gas cap tip,wlangs custom made mastercylinder holder,custom air shrouds,lonestar parking brake block off,vitos oil delete streamline steeri.g stabilizer yamaha shock covers

 

[Quadrider10]

Chassis | Suspension | Controls:
A Arms: Stock Fliped Rims.
swing arm:Stock
Steering Stem: stock
Axle: +4 Spacers
Hubs F|R: Stock
Bars: Stock
Grips: Scott
Nerfs: Tusk Comp Series
Bumper: Tusk Comp Series
Front Shocks: Stock
Rear Shock: 400ex
Brake Lines: Stock
Rotors F|R: A/M Cross Drilled Rear, Tusk Carbon Front Pads
Tires F|R: Stock/Artrax MXT-R
Wheels F|R: Stock

Body: Stock w/ Stickers I:I
Frame: 2001
Number Backgrounds: White
Bar Pad: Renthal
Fuel Tank: Stock

Engine|Drive System:
Cylinder|Head: Stock
Bore & Stroke: .30 Stock Stroke
Displacement: 200cc
Carburetor: Stock Jetted
Air Filter|Box: UNI Filter, No Lid
Pipe|Silencer: FMF Gnarly Pipe / FMF Powercore 2 Silencer
Clutch|Plates: Tusk Clutch Kit
Gearing F|R: 13/40 RK Chain
CDI|Killswitch: Stock Tether
Cooling: Air
Other: Custom Grab Bar, Custom 400ex bushings, fliped front tires

 

[blasty 95]

Chassis | Suspension | Controls:
A Arms: stock w g force 1.5 spacers
Swingarm:+3
Steering Stem:stock
Stabilizer:none
Axle :stock with durablue spacers
Carrier:stock
Locknut:stock
Hubs F|R:stock
Bars:renthal
Throttle/Clutch Lever:stock
Grips: oury
Nerfs: pro pegs
Bumper:stock
Grab Bar: stock
Front Shocks:stock(have works dual rates)
Rear Shock:stock (have a 400ex)
Brake Lines:stock
Rotors F|R:stock
Rims F|R:stock
Tires F|R:atrak mxtr

Body:stock
Frame:1994
Plasticurple (like a boss)
Graphics|Seat Cover:stock
Number Backgrounds:none
Handguards: none
Bar Pad:renthal
Fuel Tank:blaster

Engine|Drive System:
Cylinder|Head:flotek head mod\ported
Bore & Stroke:67mm\ stock stroke
Displacement:do the math
Cam:rad valve
Carburetor:keihn pwk 28mm
Air Filter|Box:uni
Pipe|Silencer:dynoport high volume!!!
Clutch|Plates:stock
Gearing F|R:13/38
CDI|Killswitch:stock
Cooling:mtn air
Other

 

[dakine97]

1. A Arms: stock
2. Swingarm:+3
3. Steering Stem:stock
4. Stabilizer:none
5. Axle :stock
6. Carrier:stock
7. Locknut:stock
8. Hubs F|R:warrior rear
9. Bars:renthal
10. Throttle/Clutch Lever: stock
11. Grips: scott
12. Nerfs: dg alloy
13. Bumper: stock
14. Grab Bar: dg alloy
15. Front Shocks: works
16. Rear Shock: warrior
17. Brake Lines: stock
18. Rotors F|R: stock
19. Rims F|R: warrior
20. Tires F|R: razr and carlile


Body:

1. Frame: stock
2. Plastic: stock
3. Graphics|Seat Cover: stock
4. Number Backgrounds: none
5. Handguards: none
6. Bar Pad: fox/renthal
7. Fuel Tank: stock


Engine|Drive System:

1. Cylinder|Head: ported
2. Bore & Stroke: .60
3. Displacement: do the math
4. Cam: none
5. Carburetor: dynojet kit
6. Air Filter|Box: stock
7. Pipe|Silencer: fmf fatty and power core 2
8. Clutch|Plates: barnett dirt digger carbon fiber
9. Gearing F|R: stock
10. CDI|Killswitch: yz 85 killswith/ngk cdi
11. Cooling: stock
12. Other: spacers

 

[Xero]

1. A Arms: stock/powder coated
2. Swingarm: stock/powder coated
3. Steering Stem:stock/powder coated
4. Stabilizer:none
5. Axle :stock
6. Carrier:stock
7. Locknut:stock
8. Hubs F|R:Stock
9. Bars:renthal
10. Throttle/Clutch Lever: stock
11. Grips: unsure
12. Nerfs: Quadzilla 250(from ebay :S also not fitted in pictures)
13. Bumper: stock/powder coated
14. Grab Bar: unsure
15. Front Shocks: stock
16. Rear Shock: stock
17. Brake Lines: front braided
18. Rotors F|R: stock
19. Rims F|R: stock/ powder coated
20. Tires F|R: F-stock? R - kenda dominators


Body:

1. Frame: stock / powder coated
2. Plastic: stock
3. Graphics|Seat Cover: stock
4. Number Backgrounds:
5. Handguards: none
6. Bar Pad:
7. Fuel Tank: stock


Engine|Drive System:

1. Cylinder|Head: shaved head
2. Bore & Stroke: ...
3. Displacement: ...
4. Cam: none
5. Carburetor: stock
6. Air Filter|Box: stock
7. Pipe|Silencer: Fresco slip on
8. Clutch|Plates: stock
9. Gearing F|R: 14/40
10. CDI|Killswitch: stock / notsure
11. Cooling: stock
12. Other:

(Should leave school next month and get a job, then it wont be so much stock >:]