A heck of a deal and need some advice

Joey_Stacks

New Member
Apr 4, 2010
201
1
0
Lancaster, PA
Went trout fishing for the first day did pretty well. On the way home my buddy says hey look at that 4 wheeler. Boom slammed the breaks stopped at the lawnmower repair shop and found a blaster in great shape with the top end torn off. My friend asked the guy how much he says 150$ He says how about 100 and boom I got a Blaster and a bill of sale.
First question how do I find out what year it is? Im guessing its 93-95
We tore into the thing and found out It really only needs a piston and rings and some odds and ends It has a pro circuit full exhaust header and can and It came with all the nuts, bolts, and parts.
So here is why I put it in the Engine section
I want to know which piston and rings setup would be the best. Im not gonna get it bored over until I blow it up again because that is just more money for something that is not required
my wristpin and center bearing are in good shape
I found 3 piston&ring setups
Wiseco 100$
WSM 57$
PRO X 85$
Which one do you think would be the best for gettin this baby running in the first place
The rest of the stuff I need is pretty simple
Gaskets
Air Filter
Blockoff plate for oil injection
spark plug
So who makes the best air filter Uni? Moose?
am I missing anything?
 

Attachments

  • blaster.jpg
    blaster.jpg
    95.3 KB · Views: 92
First you need to check the cyclinder to see if it needs to be bored.If it's ok then you need to hone it for the new piston.You need to see what bore your cyclinder is at before you get the piston so you will get the rite size.Get a top end gasket kit.Injection block off kit.I would use the Wiseco piston kit.
 
The wrist pin will come with the piston. And I would not replace the piston without changing the bearing in there... Just my opinion of course.

I would use Wiseco as well.

Air Filters are a matter of choice.. If you take care of it pretty much any of the name brands will serve you well.
 
100 dollars is a great deal, especially since it came with a after market exhaust.

I know I couldnt believe It better yet getting a bill of sale from a reputable lawnmower business. Made My day. I might even be getting a second blaster Trading my KLT 185 3wheeler aka Wu Mobile and 200 bucks for a blaster with an already rebuilt top end. So I might end up with 2 blasters in one week
here are pics of the Trike and Other blaster I MIGHT get
 

Attachments

  • RIDING 011.jpg
    RIDING 011.jpg
    90.3 KB · Views: 82
  • RIDING 043.jpg
    RIDING 043.jpg
    89.9 KB · Views: 102
200cc Aircooled ATV 24 hour endurance World Record holder. 910 miles 240cc aircooled ATV world endurance record holder. BAJA 1000 winner. Former Team Honda/Dirtwheels mechanic and backup rider. Featured in Dirtwheels, ATV Sports, 3&4 Wheel Action, ESPN and SpeedVision.


You did all that?Your one bad ass cool guy!
 
Ok I went out to my local cycle shop today to order and pick up some in stock parts came to 180 bucks for
Uni Air Filter
Pro X piston & Rings
Moose Top End Gasket Kit
Couple Spark plugs
Gear Oil & 2 Stroke Oil
I was gonna go with the wiseco piston but the bill racked up too fast and I downgraded. One Question where is a place where I can order the block off plate for Oil injection for cheap.