a arms
- Thread starter tyler1blaster
- Start date
Probably the asr a-arms. They go for around $400 and have a lifetime warranty, if you bend or break one they'll replace it
They are on Ebay. Search for American Star Racing.
Other brands might be better, but there aren't any cheaper. I like mine fine. You won't need longer shocks, but you might find that the extra leverage requires stronger springs.
Other brands might be better, but there aren't any cheaper. I like mine fine. You won't need longer shocks, but you might find that the extra leverage requires stronger springs.
Well, it's a project, but yeah basicly bolt-on. The hardest part is the alignment. I did a write-up explaining how I did it a couple of months ago. (suspension section)
On eBay they sell them with or without the tie-rods and stuff, and with standard ball joints or heim joints. I got the heim joint ones cause they seem like they should be stroner and def look trick. You just gotta spray em with WD40 after washing to keep out the water
On eBay they sell them with or without the tie-rods and stuff, and with standard ball joints or heim joints. I got the heim joint ones cause they seem like they should be stroner and def look trick. You just gotta spray em with WD40 after washing to keep out the water
Last edited:
Yeah, engine mods are fun, I agree, but it's amazing how much different a blaster handles with suspension mods.
With good suspension and a relatively stock motor you'll be faster that a built motor with stock suspension. You can only go as fast as your suspension will allow
Similar threads
