50hp_pump gas Blaster

[Kennedy_Power]

One on our members requested a bad ass Blaster set up for 300 hundred foot drags. The engine set up was more then 50HP on pump gas; if time allows I will switch to meth to show the power increase from the different fuel.
The pipe of choice on this set up was the Vito pipe. You can buy the pipe from me or direct from Vito.
If anyone is interested in this type of power; please email me at kennedypowersports@gmail.com
Thanks

Flickr: kennedy_power's Photostream

 

[djack12]

looks good. i cant wait un till i get enough cash together for a 240 set up.

 

[HOBBYHORSE]

that thing is going to be awesome!! we can't wait to see the faces at the track.

 

[Kennedy_Power]

Big gains in Meth_VS_gas
Look at the huge gain in the TQ and Power in the mid-Range
Flickr: kennedy_power's Photostream

 

[tacketts9]

nic eone of my old quads suppose to have 240 kit in it u know how i would check that my friend has it now

 

[YZ Otis]

Big gains in Meth_VS_gas
Look at the huge gain in the TQ and Power in the mid-Range
Flickr: kennedy_power's Photostream

Is that with everything the same in the motor, just switch to meth carb?

 

[370]

nice setup... what cylinder is used on that? i assume it's not a factory cylinder with a 72mm sleeve

 

[Kennedy_Power]

nice setup... what cylinder is used on that? i assume it's not a factory cylinder with a 72mm sleeve

CT cylinder, Vito Pipe, trick carb, kennedy port and head design
244cc engine
Can make same power from a Vito cylinder or BB sleeve set up
Each cylinder has a different set up to produce 50+HP

 

[370]

i just sold a vito 240 set up BRAND NEW in the box.. to a dude in MI.. tried to talk him into the 3mm vito crank i had, and the shearer pipe, and 33 pwk... but he said the 240 would be enough

 

[Kennedy_Power]

It takes a lot of work to peak over 50hp with a strong curve. My set up took months to get the torque curve up. The Vito Pipe works KILLER on the CT cylinder set up!

 

[370]

i had a guy ask me about the vito pipe for a blaster the other day.. he had asked me what pipes were good for blasters.. and i gave him the old.. "depends what your doing with it, and what you've got/gonna do with it" i knew the dyno port and the power pros were both good.. and of course the shearer for sale in my barn.. haha

 

[Kennedy_Power]

Shearer Blaster pipe is the best for the trails and Vito is KING for tt racing, flat track, drag.........

 

[Larry's Shee]

For $h!+$ and giggles bout how much $$ do you have in the motor??

 

[HOBBYHORSE]

For $h!+$ and giggles bout how much $$ do you have in the motor??

you could build this engine complete for under $1500.00, if you shopped around a bit.

 

[Kennedy_Power]

I am currently working the set up to push over 60HP on Meth and will be working on a set up for Hobbyhorse that will be using 10% Nitro methane or more to push the engine into the 70’s. I lock up clutch will be a must and the crank will have to welded. Nitro does not burn like gas or meth; it explodes in the combustion process and causes severe stress on all the parts.
I will keep you posted

 

[Blasterdude27]

I am currently working the set up to push over 60HP on Meth and will be working on a set up for Hobbyhorse that will be using 10% Nitro methane or more to push the engine into the 70’s. I lock up clutch will be a must and the crank will have to welded. Nitro does not burn like gas or meth; it explodes in the combustion process and causes severe stress on all the parts.
I will keep you posted

Keep up the good work manI:I I wanna see this runing when finished!

 

[blasters/banshees]

sounds like a sick motor