240 CT cylinder, How to know?????pics

[79 bronco]

Look at the 1st pic it has a big 6 bolt reed cage, also look at the clutch cable mount on the cylinder its different, now look above the clutch cable mount between the FINS, can you see the cylinder stud and nut, the head has to be off to get to the back 2 cylinder studs. Now look at 2nd pic do you see the vent tube, its a very tight fit, i had to die grind some off the outside of the cylinder under the reed cage to get the vent tube on. I recommend to put the vent tube on before you put the cylinder on, or get a angle vent adapter.

 

[DUALSTROKE]

Nice pics and great info for those who don't know.Sure is a nice cylinder.

 

[scotj77]

show off! Damn I'm jealous.

 

[royalt67]

Nice pics. Cool to see one up close. I bet it rips.

 

[tyler1blaster]

very clean. nice pics

 

[d00mlol]

great info, nice pics, and good job!

 

[slickerthanyou]

So do ya need longer rear cylinder bolts or am I missin something? Looks like they should be at least and inch and a half longer.

 

[79 bronco]

So do ya need longer rear cylinder bolts or am I missin something? Looks like they should be at least and inch and a half longer.

The ct240 kit comes with longer cylinder studs...

 

[blasterfreek30]

that is a killer setup up bro, have u ever posted vids of it hauling the mail around??



and if not.......where are the vids lol

 

[slickerthanyou]

The ct240 kit comes with longer cylinder studs...

Cool! Have to see in in person some day!!