'01 Part Out

[MayhemMOORE]

After deciding I don't have the time/money to invest in restoring my Blaster right now as I have a bike waiting to be finished up, I going to part out what's left of it. It was stolen in '01, recovered in 2011, and I picked it up from my parents in Sept '12 and stripped off whatever was still salvageable. Below is a list of everything that didn't go right in the trash.

Updated with some prices.

-Front drum brakes/spindles - $25 shipped
-Upper A-Arms (paint is rough but joints seem good) - $20 shipped
-Stock gas tank- $30 shipped
-Stock seat (blue/black, rear corner has small tear) - $40 shipped
-Rear sprocket carrier w/jam nuts - $20 shipped
-Solid rear brake disk/carrier - $20 shipped
-CDI/TORS/Coil - $15 shipped
-Clutch cable - $8 shipped
-Foot pegs and rear brake pedal (for cable disc) - $20 shipped
-Tie rods/ends - $20 shipped
-Air intake boot w/stock filter cage/mounting plate - $20 shipped
-Most bolts from frame/suspension - let me know what you need
-Armadillo rear skid plate (a little beat up but still serviceable) - $20 shipped
-DG grab bar (Has some battle scars) - $20 shipped
-Stock swingarm - $50 shipped
-DG Full skid plate (not the prettiest thing but still works. Missing all but 2 of the mounting clips.) - $25 shipped
-DG Bumper (Has a few battle scars but cleaned up pretty good) - SOLD


If I find anything else I will add it to the list. If you want a pic of something specific let me know.

 

[Awk08]

how bout adding some prices to that list ?

 

[MayhemMOORE]

Honestly, I was away from the blaster so long, without researching each part I don't really know what they're worth used anymore. I like to help people out on the forums I'm on when I can as others have done for me.

 

[Blasterr]

Pics too ??????????????????????

 

[MayhemMOORE]

I will get everything out and take a group photo lol. Then if someone wants more detail I can take one of the part in question.

These are for someone who asked about the bar.

 

[heatlbj6]

how much for that rear grab bar

 

[MayhemMOORE]

Here are a few shots of all the stuff but the engine, carb and a bunch of the random bolts. Stuff has been sitting for quite some time so it is dirty/dusty in the pics.

 

[ChrisZx7]

Pm me price on skid plate shipped to 14580

 

[MayhemMOORE]

PM sent, ChrisZx7

 

[Blasterman96]

Pm sent on bumper

 

[MayhemMOORE]

I don't know if my PM's are working since my sent items is empty, so if you asked for a reply and didn't get it, let me know.

 

[MayhemMOORE]

Bump...need to make some room downstairs.

 

[Braaaptor]

Do you still have the wiring harness? Even if its in poor shape? I'll probably take it if so and the price is right.

 

[MayhemMOORE]

I ended up scrapping it. Most of the wires were cracked/corroded and it had been spliced into so I just saved the boxes and tossed it.

 

[beaten blaster]

I ended up scrapping it. Most of the wires were cracked/corroded and it had been spliced into so I just saved the boxes and tossed it.

dg bumper shipped to 12992 pm me please

 

[MayhemMOORE]

Few shots of the bumper. Has a few dings but could be cleaned up more if needed.

 

[luk3x3]

still got the front tires?
what about exhaust?

and is the skid plate still availible?

 

[MayhemMOORE]

No tires, exhaust is gone, and which skid plate are you asking about?

 

[MayhemMOORE]

Bump...still got a bunch of this stuff left.

 

[Blasterr]

Motor SOLD 151515151515