Recent content by Rubes

lean pilot or incorrectly adjusted air screw could cause this also

860-230-5003 call Ken Oconnor He is truely "The Blaster Master"

I am thankful to be alive and well, and that we haven't got alot of snow yet, and that I am going to Little Sahara Oklahoma in 112 days for SNAKE HUNT 2013

Waiting..........

Thanks man, greatly appreciated

Ya the carb opening is 2.34 and silicone intakes say that they will stretch and eighth of an inch. Not sure if 2.25 would be enough, do you think so?

I have a 35mm airstriker and a cfm box, well the problem is the rubber coupler that comes with the air box sucks! It's a wrestling match to get the carb on and off so I was looking at silicone intakes . Com and not sure what size reducer to order. Any input from some one with the same set up...

No no, I was wondering if the engine cases have to be grounded to the frame? I only ask cause the stator has a black wire coming out of it and the coil has a black wire that gets bolted to it. This wouldn't have anything to do with ken other than he did all the engine work

Ok, so I have a freshly powder coated frame and motor coming back from KOR my question is, do I have to ground some of the powder coating off on one of the engine mounting tabs? It's an 04 blaster and it has a black wire coming from the stator is that a ground? Any input is appreciated thanks

Correct me if I am wrong, but cant you just splice the Yellow/black to the black at the cdi box and just unplug everything else rather than splice here splice there. this way its just one splice (for the 03+)

Change the gear oil, it'll be just fine :) just be sure to extra in!

Ah! got ya I only have the standard travel ones :( any others that will make a difference? for a 120# rider

I believe that I read some where that you can use Yfz 450 front shocks if you have plus 3 arms, is this correct? I have asr +3 +1's just wondering if it will work and pros and cons of doing so thanks

Face book is an evil thing, I know of atleast 5 marriges that have been split because of it. All most got mine, not to mention some of the pointless games on there that people get addicted to ofcourse this is all my opinion

Thanks for all the welcomes, Ken says he should be sending the motor back to me this week all finished up, I cant wait! He has been awesome to do business with and eager to answer any questions I had (and I had alot of them)