Been told this won't work so I gotta try. I can survive the embarrassment of failure I'm gonna isolate the motor with rubber. Kinda crude but I might learn something. I'll enlarge the hole in the cases for the swing arm bolt and install rubber bushings. I'll use rubber bushings at the other bolts also. That's what the little tubes are for. I'll update it as I go.
This is all because of Freek and his slick stator windows. I just had to have one for a YZ. In the process of trying to make one I found play in the main bearing on the stator side Since the motor had to come out I decided to play with the mounts. Props to Freek for his great ingenuity. Maybe someone can figure out how to trigger the LED's to strobe the flywheel and freeze a logo. I have it working for a bit but can't survive the big voltage swing from idle to 10,000 rpm. Kinda cool when it works.
We where gonna put our big bore YZ in this summer but this quad is already a lot of fun. We'll look for a roller to build a big bore YZ Blaster that's a little nicer than old Mr. Potato head here.
YZ Otis
This is all because of Freek and his slick stator windows. I just had to have one for a YZ. In the process of trying to make one I found play in the main bearing on the stator side Since the motor had to come out I decided to play with the mounts. Props to Freek for his great ingenuity. Maybe someone can figure out how to trigger the LED's to strobe the flywheel and freeze a logo. I have it working for a bit but can't survive the big voltage swing from idle to 10,000 rpm. Kinda cool when it works.
We where gonna put our big bore YZ in this summer but this quad is already a lot of fun. We'll look for a roller to build a big bore YZ Blaster that's a little nicer than old Mr. Potato head here.
YZ Otis