Hi all,
I'm building a blaster with a Yamaha WR200 engine (same as DT200). The mount on my engine (where it bolts to the swingarm) is about 5-6 mm larger (3mm left and 3mm right) as the stock engine mount...Can I cut/trim my engine mount a little bit, or should I cut/trim my swingarm? Everything else bolts up with no problems...
Thanks in advance!!
I'm building a blaster with a Yamaha WR200 engine (same as DT200). The mount on my engine (where it bolts to the swingarm) is about 5-6 mm larger (3mm left and 3mm right) as the stock engine mount...Can I cut/trim my engine mount a little bit, or should I cut/trim my swingarm? Everything else bolts up with no problems...
Thanks in advance!!