Works or yfz 450 front shocks

[stinkinlincolnw/blaster]

probably get them anyway because hatch honda might use them if i dont. thanks for the help DJ

 

[245stroker]

You can use yfz fronts on your asr a-arms without a shock conversion kit. I ran a set with burgard +2+1 a-arms. What I did was I set the preload all the way down. The 2 big nuts that adjust your spring. I screwed them almost all the way up. That way the front end isn't alot higher then your rear end. When I suggested getting elka's, i was talking about finding a used set on ebay. I've seen quadruple rates, comp adjustable with piggyback rezzies go for $400, ready to bolt up. If you were to sell both sets of fronts, the works and the yfz's, you should be able to get $400-$600 for both of them. Just something for you to consider, maybe

 

[coreyownz]

ill take the works...

 

[stinkinlincolnw/blaster]

You can use yfz fronts on your asr a-arms without a shock conversion kit. I ran a set with burgard +2+1 a-arms. What I did was I set the preload all the way down. The 2 big nuts that adjust your spring. I screwed them almost all the way up. That way the front end isn't alot higher then your rear end. When I suggested getting elka's, i was talking about finding a used set on ebay. I've seen quadruple rates, comp adjustable with piggyback rezzies go for $400, ready to bolt up. If you were to sell both sets of fronts, the works and the yfz's, you should be able to get $400-$600 for both of them. Just something for you to consider, maybe

yea i got the 450 shocks my bikes upstate so i think me and hatchhonda are going up for the weekend and i'll install them on the weekend or when i come home also got the 450 rear shock today too off lonewolf. so im pretty set.