I need a little help everyone.....
I have an 88 blaster ....
The stock rings blew....
Tore it down( bottom end was fine) honed it out little bit bigger piston... Domed the top of the head a little.... Throw it all back together.... Wont kick over... Check the reeds - bone dry...pull the carb... Rip that down cleaned everyhole and jet .... Throw it back in.... No spark at all... No red light while kicking it.... Pull the magneto and stator- replace both... Now
I have a spark( red light comes on during kicking now but not as bright as it should be.... I need to pull the plug to see if the gas is gettin thru the reeds still but if it is.... What else could it be.. Voltage reg.. Ignition coil or both or the cdi.. And if gas isnt gettin thru the reeds could the be installed wrong... There after market and have 8 valves instead of the stock 4....
I have an 88 blaster ....
The stock rings blew....
Tore it down( bottom end was fine) honed it out little bit bigger piston... Domed the top of the head a little.... Throw it all back together.... Wont kick over... Check the reeds - bone dry...pull the carb... Rip that down cleaned everyhole and jet .... Throw it back in.... No spark at all... No red light while kicking it.... Pull the magneto and stator- replace both... Now
I have a spark( red light comes on during kicking now but not as bright as it should be.... I need to pull the plug to see if the gas is gettin thru the reeds still but if it is.... What else could it be.. Voltage reg.. Ignition coil or both or the cdi.. And if gas isnt gettin thru the reeds could the be installed wrong... There after market and have 8 valves instead of the stock 4....