Will this carb work? will it give better performance?

[ruairiyblaster]

Yamaha Honda Suzuki Blaster Carburetor carb Keihin 35mm PJ flat slide | eBay

Will this carb work on my 05 blaster with a milled head vforce 3 reeds and ported and polished and bored 0.5 over and a fmf fatty pipe thats on the way?
What extra will i need boots etc? Will this provide me with better performance is the 35mm piece the one that connects to the air box or the one that connects to the reeds?
Do you recommend them? What do you think of this particular carb?
Will it need jetted up for a fmf?
These might be stupid questions but i dont know anything aboutt them.


Thankks

 

[blasterdemon7]

That's a nice carb but you will need a new reed boot,modify your air filter boot, TORS delete cable and may need a reed spacer to clear the clutch arm. I'm not sure on the jetting part.

 

[Awk08]

that seems a little steep for the condition it looks to be in

heres a cheaper/cleaner looking one..............

B 1986 TRX250R Honda 86 TRX 250R Keihin 34mm PJ carburetor | eBay

 

[ruairiyblaster]

I have a tors delete already, and awk thats a real nice one but he wont ship to U.K im an IRISH man , will look for some on ebay U.K and would i need to jet it?
Thanks guys

 

[ruairiyblaster]

And what other carb do u recomend that would be compatible with mine?

 

[Awk08]

ic...acrosss the pond !!!!

the 34/35's seem to be most popular, pj's or even better pwk's

yes to needing rejetted, a needle change seems to be key to making these work for us, a "dgh" or "cel" needle
get one in your hands first and we'll be able to help you better