I'm thinking of trying Beaverdale hillclimbs next year on my,now, stock blaster. And I have the money, I was wondering if throwing vForce 3 reeds in it, a 35mm carb, and a new exhaust would better my chances of making the hillclimb?
Will these mods help?
- Thread starter GrungeGod494
- Start date
yeah.... deff if u wanna do hill climbs.... good top end pipe (right bend), porting, 35mm and vf3's should make plenty of power...
whats the point of all the motor mods if he cant stay on the quad u need some better suspesion first
well my reeds are shot so, their first. and does anyone know where i can get some reeds quickly? I can only pay cash though.
rockymountain atv is a good site. Give someone the cash and have them buy it with a credit card or paypal
check the classifieds.
also to do hill climbs better, you will need a longer swinger, that is one down fall for blaster. they have a small wheel base.
where i ride, i watched this kid try to climb this big hill, he made it to the hard part then he just flipped. he had the power, didn't have the wheelbase.
you are going to want to get good suspension to climb hills. any bumps will throw you off balance and make you wreck.'
also who said that a good pipe is a right bend, it doesn't matter what bend is in the pipe, as that does not affect performance.
if you are on a budget, you would be better off getting a FMF pipe (they are better than stock and cheap), the reeds, then getting some banshee shocks in the front, 400ex shock for rear, and some 20" rear tires (the stock ballon tires suck ass)
also to do hill climbs better, you will need a longer swinger, that is one down fall for blaster. they have a small wheel base.
where i ride, i watched this kid try to climb this big hill, he made it to the hard part then he just flipped. he had the power, didn't have the wheelbase.
you are going to want to get good suspension to climb hills. any bumps will throw you off balance and make you wreck.'
also who said that a good pipe is a right bend, it doesn't matter what bend is in the pipe, as that does not affect performance.
if you are on a budget, you would be better off getting a FMF pipe (they are better than stock and cheap), the reeds, then getting some banshee shocks in the front, 400ex shock for rear, and some 20" rear tires (the stock ballon tires suck ass)
Power is great, but if you really want to climb a hill, a +3 swing arm (or more) would make a huge difference.
I suppose your right the hill climbs I have to ride are nowhere near insane. I still think a grippy set of good tires should be the first step. So thanks for being a prick and calling me out homie I:I
i would say for sure to get the reeds and pipe, extended swingarm as well. also if you have the money to go for a +3mm crank and have the cylinder ported to match your setup, then get your builder's opinion on what size carb would work best for you. and if you still have the stock tires, you might wanna ditch 'em for something that will actually hook-up
Similar threads
