Who's Blaster is Benched?

[murderedblaster]

Just wondering how many people on this forum have a blaster that is not running and what is wrong with it.... a lil bored....

 

[Corey]

Mine isn't, i have a fried top end and a bad clutch lever... It'll be up and running in no time though.

 

[Foolio]

Mine is being put together. Got it a couple weeks ago w/o engine. I now have a stock engine in it and am now waiting on carb, exhaust, air filter and such. Maybe a couple weeks and then we'll see...

 

[brandoz28]

mine is still apart...what's wrong with it? previous owner completely ripped apart and molested a perfectly good blasty and lost a lot of stuff

 

[stephen12091985]

my engine is out gettin +3 crank and ported and head work

 

[sc0r1a]

mine was in boxes last month, its all together now but still wont run. Something with the carb idk

 

[blasterdude14]

mine is down with annoying electrical issues that i cant figure out, also need a pilot jet

 

[fioz600r]

Mines got the motor out freshly rebuilt top end. Waiting for parts to finish her up. Plus what ever I find missing as I go LOL

 

[2000blasternewb]

mine is down too. originally had a fried top end and then I tried rebuilding it and that didnt go to well. Now I am almost done with my 400 swap.

 

[2strokepower]

my engine is out, and the bike is getting a new clutch,clutch cable, top end, powdercoated frame, and other goodies.

 

[92blaster]

not a blaster but the 250R is getting the frame gusseted.. and the hybrid is almost done waiting on throttle cable

 

[Blasterdude27]

Under the knife

Well and the piston has two score marks..... so I may as well replace it.

 

[Awk08]

top end off, sent to ken occonor racing for porting, well he found my last bore job was bunk, so new 67mm wiseco piston kit on it's way to him

 

[fioz600r]

not a blaster but the 250R is getting the frame gusseted.. and the hybrid is almost done waiting on throttle cable

Same with my LT frame is out getting gussets and frame supports....

 

[UniRacing]

Changing my trans side crank seal,

I have removed my
Clutch cover
Pressure plate
Clutch plates

Now

How do i remove the clutch basket?
Buy a clutch holder and wrench it off?

Also after i get that off,do the gears just slide right out?

Im stuck

 

[fioz600r]

Dam alot of us got a bunch of unrunning Blasters LOL

And Uni get the Motion Pro Clutch boss tool bro one side holds the clutch boss and the other side holds the flywheel best 30 bucks I ever spent...

 

[DirtDiggler]

every week goes by and i get more of it back together , It will be singing by the end of april again , gonna make some dunes summer , then I plan on a +3 , 240 kit , 75watt ricky stator and +4 timing mod . 34mm carb and a scary port job . Next rebuild will be full on stip down to bare frame for powdercoating , all new bearings , bushings , gussets ( before the powdercoating of course ) custom +4 extended round swingarm , and a watercooled head kit . and maybe some of them YZ nerf bars , with the heel guards , those are sick .....

 

[MINIGfather]

mines been down for about a year now. just got my top end back. hope to put it together then just need some odds and ends to get it running...fingers crossed

 

[murderedblaster]

waiting for clutch cable be running in a couple days.... keeping my fingers crossed

 

[blaster195]

damn lol is should be a blaster er section