wheel spacers for rear?

[Racer.Z.]

down falls to +2 solid doughnut spacers? upsides? :-/

 

[Awk08]

you should be just fine with the solid ring type !!!!

 

[Whitty21]

the axle is gunna be more likely to bend, but it would take a seriou impact like landing a jump crooked to do that

 

[Racer.Z.]

alright. i can have my dads friend make them cheap for me, so its only temp for now till i can get an axle

 

[DirtDiggler]

Even the CNC stud type spacers are fine , I,ve jumped on my +5's a lot and never hand a problem , very reasonable on eBay money wise ......

 

[NOVIS]

definitly a good upgrade sice it wont be any different from a extended axle, it will put a bit more pressure an the stock axle which isnt very strong but unless you constantly riding a mx track or always casing jumps then you shoudl be fine. i ran 2.5" per side stud spacers on my blaster and didnt have any problems, i didnt jump very high with it tho.

 

[blasterkiidirl]

mines widend 5 inc and handels perfectly I:I

 

[Racer.Z.]

thanks for the input guys,, imma have this guy start makin them asap