Ok so my blasters stock frame is getting pretty sh*tty, rusty, and beat up now since its 7 years old. Im curious to know what to do: should I:buy a whole new frame already powdercoated and my desired color or get my stock frame touched up and powdercoated to my desired color? I keep going back and forth between the 2, but whats my best choice?:-/
Whats better for my frame?
- Thread starter Triple_B
- Start date
just sand it and paint it with a few spray cans if you do it right it comes out perfect, most blasters out there are older than 10 years some are 20 and some even older and they are doing just fine on stock rusty frames
Depends..... Mine was to the point that its pretty much cracked and bent itself apart. I have to get a new one someday. (when I feel like it lol)
If your frame is still straight I would strip the paint off, sandblast it, then gusset it. I wouldn't PC it because if it does eventually crack you'll be out even more cash, get it painted with sprayed on auto body paint and a hard clear coat- I've found that to be VERY strong and easy to scrape off if needed. You can do it yourself too.
If your frame is still straight I would strip the paint off, sandblast it, then gusset it. I wouldn't PC it because if it does eventually crack you'll be out even more cash, get it painted with sprayed on auto body paint and a hard clear coat- I've found that to be VERY strong and easy to scrape off if needed. You can do it yourself too.
Similar threads
