what pipes should i grab 4 a 240
- Thread starter 03blasteryfs03
- Start date
It depends on what kind of riding you do but I would suggest one of the right hand pipes like a factory 7 (or any of the other pipes made by power pros) or a dynoport high volume. I wouldn't suggest the toomey for the big bore. Its an awesome pipe for a stock motor but I've never heard of anyone using one for a big bore.
I will say stay away from the FMF with the big bore. Its not the best with the increased air flow
Toomey is EXCELLENT for blasters but not the best for a 240 kit. For a 240 kit I recommend a F7, Dynoport, Trinity, Vitos Fat Bastard, or a LRD.
B1 are just the same as the banshee's t6's...both are the best for a stock motor but once you get to modding you MUST upgrade them...they wernt designed to be with a 240
No sir E. Toomey pipe is by far the best pipe for a stock motor, or a motor with just some reeds, and p&p
the vitos fat bastard is the only pipe mentioned that was designed for a 240, the rest may work but the fat bastard has the largest volume and best mid and top end
kennedy has been using the vito's pipe lately and getting some pretty good numbers out of it. if you check out the "50hp pump gas blaster" post i belive that was with a fat basterd but if you planning on doing some porting on your 240 kit i would leave the pipe choice to the engine builder cause they will know whats going to work best with the porting
ya that is wat i was thinking a mild port work job with some boysen reeds and i am going 2 put on a 34 mill pwkso vitos it is
thats what i said bro...i said there the best fer stock but not on 240's...
