What do I need to do to make banshee hydros work?

[Braapbraap95]

I got just the calipers and the master cylinder and lines. I obviously need rotors, and a lever. I heard that 03+ blaster spindles bolted on to banshee hydros, is this the case? Also other than the spindles, rotors, and a lever, what else do I need to make these work?

 

[Braapbraap95]

bumppp!

 

[DUALSTROKE]

The 03 spindles from a blaster are a direct bolt on.Then just use the shee hubs,calipers,lines etc.It is cheaper and you can use banshee spindles or stock blaster spindles.

http://www.exriders.com/vbb/showthread.php?s=&threadid=283464

http://www.blasterville.freeservers.com/frontbrakes.htm

I did it different on my sig bike but the other project that is almost done I just did it the way the first link shows and it works pretty damn good.I'll shoot you some pics tommorrow after I take some pics of it.You need the shee hubs with rotors,the master cylinder and all the lines.Let me know what you don't have cause I have a spare master cylinder I believe and some of the lines.

 

[Braapbraap95]

If I can find cheap 03- spindles I'll just do it that way. I can get the calipers, lines, and master cylinder for 20+shipping.

 

[DUALSTROKE]

If I can find cheap 03- spindles I'll just do it that way. I can get the calipers, lines, and master cylinder for 20+shipping.

Cheap is the key word.

 

[Braapbraap95]

Yeah shipping is gonna bring that deal to hell.