S Stevie9418 New Member Mar 17, 2013 5 0 0 Mar 17, 2013 #1 Do you need to split the case on a kx250 to replace the water pump seal if not then whats the easiest way to replace it
Do you need to split the case on a kx250 to replace the water pump seal if not then whats the easiest way to replace it
I ihcguy New Member Mar 15, 2013 73 1 8 Ontario Canada Mar 17, 2013 #2 what year is the bike my 98 was ablle just to take 2 bolts off and u have a line into the pump and a line out
what year is the bike my 98 was ablle just to take 2 bolts off and u have a line into the pump and a line out
I ihcguy New Member Mar 15, 2013 73 1 8 Ontario Canada Mar 17, 2013 #4 is there a hose into the pump and a hose out like the late 90s
C ChrisZx7 New Member May 15, 2012 794 4 0 Rochester, Ny Mar 17, 2013 #5 Do you have a manual? Guessing not since your asking us. Let me check mine. E: Sorry, my book is only 92-2000.
Do you have a manual? Guessing not since your asking us. Let me check mine. E: Sorry, my book is only 92-2000.
OConnor Racing Mines Bigger Technician Dec 1, 2009 2,082 711 165 CT www.kenoconnorracing.com Mar 17, 2013 #6 Cases don't need to be split. Just remove the clutch cover. Replace the bearing and BOTH seals. Here's a link to the parts. http://www.ronniesmailorder.com/fiche_section_detail.asp Call me if you need me to order them.
Cases don't need to be split. Just remove the clutch cover. Replace the bearing and BOTH seals. Here's a link to the parts. http://www.ronniesmailorder.com/fiche_section_detail.asp Call me if you need me to order them.