my first post having problems with my 28mm flat slide mikuni carb it idles fine but when I give it any kind of throttle it stalls the stock jets in the carb main jet #180 pilot jet #15 needle jet #175p-8 throttle valve #25 jet needle #5dp39 right now I put a #300 main in it with a #25 pilot my setup stock bore motor with FMF SST full exhaust cfm airbox boysen rad valve with power reeds +4 advanced timeing mix 32/1. not sure what's going on with carb can't get it to move so I can't plug chop it I put the stock 26mm carb on it and runs fine any help with this carb it would be great