video of my blaster automaticly reving

[xxxalpinexxx80]

sry for the bad video quality, came from my iphone

 

[driftmafia]

what have you checked so far, its kinda hard to diagnose a problem without actually physically looking at it...lol

 

[yamahaulling]

You got an air leak some where. Probably around the intake.

 

[yamahaulling]

Or make sure the throttle cable is too short.

 

[ron89]

nah its some thing with the tors or the slide int he carb not going all the way down ..

 

[FMFRacingBlaster]

It may be some mud or dirt in your reeds, because what happens is dust gets in the reeds, then mositure will develop over time and create a mud ball the will hold the reed open a little, or you could have a slit or something in your carb boot. See If you can lower your idle down to normal, if not then trial and error.

Hope this helps...
FMFRacingBlaster

 

[D&D riders]

I had the same type of thing happen when I got my first blaster.I'd start it and then it revved like crazy. I think you might need to turn down the idle screw.

 

[lilmegill727]

yeah check for air leaks or check your idle screw